CI First Look: Hasselblad Tethering in Capture One

 In Hasselblad, Hasselblad CFV II, Hasselblad Tip, Hasselblad XCD, News, Steve Hendrix, X2D, X2D II

In a year of scarcity for new hardware announcements in the photographic industry — and so far zero hardware announcements from Hasselblad — impactful news still happened on the software side, including the stunning news in June that after all these years, Capture One finally added compatibility with Hasselblad cameras (some of them …). This was only editing support, but today, with the release of Hasselblad firmware 1.4.15.7 and Capture One 16.9.1, tethering support is now here. We took a quick look at how this works today.

We’ve been accustomed to the excellent Capture One tethered support for Phase One cameras over the years. With the independence of Capture One in recent years, we’ve seen less focus on Phase One integration, and more attention to other camera manufacturers. In recent years, Fujifilm GFX and Leica S/SL bodies were added with full support, including tethering. However, some of the nuts and bolts — particularly with tethering — were less than refined or ideal. We’ve brought these issues to the attention of Capture One, but in some notable instances, haven’t seen a lot of progress. Typically where we see issues is with camera control handoffs, and live view performance.

So this brings us to Hasselblad. First off, some quick things to know.
Requirements:

  • Capture One Version 16.9 (16.9.1.27 is current and recommended)
  • 1.4.15.7 firmware for the X2D II.

Files come in as .3FR, not .FFF. The only currently supported camera is the X2D II. Hoped for is extended compatibility for at least X2D and 907x/CFV 100c. It would be nice to see the 50mp models also. That choice may or may not be completely up to Capture One, so don’t jump to blaming them if your camera is not supported.

When connecting your USB C cable from computer to X2D II, a dialog should pop up on your X2D II, be sure to choose 3rd Party Tethering!

Camera Controls

While tethered capture was actually possible with previous versions of Capture One (and even previous firmware with the X2D II), there was no ability to control the camera settings from the software and no live view. Full control is now enabled. Shutter speed, aperture, ISO settings are all available. Most camera settings, like choosing focus modes, drive modes, are also available. Some fields are greyed out, and require intervention at the camera level. Some of the greyed out fields are not user adjustable even at the camera, but do seem to be updating (battery percentage, for example).

I’d like to see some more camera controls creep into the Camera Settings in Capture One. For example, one can set Self Timer in Drive Mode, but there’s no option to tell the Self Timer function to Stay or Exit after the capture. Not as big an issue when one can Command-K from the keyboard, but some workflows might benefit from the ability to dictate that Self Timer continues from Capture One. Controlling lens focus from the software does not currently seem to be active, clicking the toggle arrows to advance or withdraw focus does nothing. This is the case whether in live view or just capture mode.

Buffer Performance

Frame rate into Capture One holds up well. On my 2021 MacBook Pro M1, I shot consecutively for 20 seconds, which knocked off about 50 captures. The X2D II can hit up to 3 seconds per frame, but after about 40 frames, the pace slowed to about 1.5 sec per frame (per the camera buffer). The first 7 captures were presented to Capture One within the initial 10 seconds. In my experience, the first few captures come in quickly, within about a second, then it settles into about 2 seconds per capture appearing in Capture One. So after 20 seconds, the remaining 33 shots came in, which took about 30 seconds more.

The Auto Select Capture seemed to be fully functional. However, the difference in performance between — Immediately – When Preview Is Ready – When Fully Ready — was so close, that it didn’t seem to matter too much which you chose, they all presented fully realized within about a second.

Live View Performance

We’ve definitely seen some live view issues with other tethered cameras, and have notably published some of these findings. An example of this would be the zoom function not working, the live view zooms in, but it is only zooming the pixels, the live view itself is not zooming. Also, we’ve seen even when zooming in this way that only a small portion of the zoomed in screen is visible, and doesn’t allow scrolling all the way into the corners.

What I started to now write was — I’m happy to say that the live view implementation with the X2D II seems to be free of these restrictions, for the most part. But this unfortunately, is not the case. At least for now, the zoom function in Capture One does not work at all. The zoom slider is inactive, the +/- zoom tool is unresponsive, and the Pan tool, which can zoom 100% when double clicked (and I use all the time) is unresponsive. Zooming can happen, if one happens to have Auto Zoom enabled on the X2D II under Focus Assist. So if you manually focus the lens, the live view in Capture One will mimic the live view on the X2D II. And the response/frame rate is excellent, smooth and fast. But in addition to that inconvenience, you can’t pan it. And the view when zoomed is only where the zoom box on the X2D II screen happens to be positioned. From the X2D II screen, the view can be moved to anywhere on the screen, but then you’re doing a dance with the zoom and fit to screen as you take your hand off the focus ring. How disappointing! I hope this is user error, but I fear it is not.

I am hopeful, however. I think this is just not here yet, and this certainly places a significant restriction on who will benefit from this version of Capture One for tethering the X2D II. I am certain this control for live view from the software will come. But we won’t be able to assess how well they have implemented this critical function until then.

Checking Some Unique Capture One Tethering Features

Capture One has a set of behavior tools known as Next Capture Adjustments, just one of the many unique advanced tools for tethered capture. For example, Next Capture Adjustments can be set as Defaults, Copy From Last, Copy From Primary, etc. These settings dictate the behavior for the next capture, and the X2D II seems to obey all of these parameters.

There is also an overlay function in Capture One. This is present in the captured image as well as live view. It allows you to overlay a layout with full control over positioning and scale, and shoot to that layout with proper subject placement. This also seems to work as normal with the X2D II.

We also checked to see if orientation controls were working. The controls are greyed out in Capture One (under the top Camera menu), but it does replicate whichever orientation the camera is shooting in. If shooting in vertical or horizontal orientation, images come in as they shown in camera. When using Live view, it also adheres to this behavior. In the event one shoots straight down (say, for copy work), cameras will sometimes auto rotate when you don’t want them to, and far as I know, the X2D II has no orientation controls in camera, it is all auto. But in that event, one could manually rotate in Capture One, then set Copy From Last for next capture behavior, and it would then orient for each capture the way you prefer. That works for image capture, however for live view there currently doesn’t seem to be a workaround if the camera isn ‘t giving you the orientation you want to see.

The CI Take

In a year barren of hardware announcements … you know, I’ll take this! It’s not that I never expected this to happen, it’s just that it came out of the blue and progressed really quickly. Hasselblad users have to be super happy. This obviously impacts commercial photographers of all types, studio/product photographers, architectural photographers, formal portrait photographers, cultural heritage photographers. Importantly, this is a first look exercise, it’s not a bug hunt, so be aware that there could be bugs or idiosyncrasies that might crop up. Also know that if you update the firmware to enable this in your X2D II, and something in the firmware code isn’t happy, you cannot downgrade your firmware. So be aware for upcoming mission critical projects.

With that all said, at first glance this tethering implementation seems to be promising. But it is difficult to feel fully enthusiastic with live view a virtual no show in this version. One hopes an update will soon be forthcoming. But even so — going through this with the X2D II highlights some of what makes Capture One the premium tethering software in the world. It’s an excellent editing program, but there is competition there. For tethering, however, there really is no competition (95% + of the world’s large studios use Capture One for tethering). With tethering in mind, the vast array of thoughtful features, the performance, and the reliability, are unsurpassed. And now this is (almost) here for Hasselblad.

steve hendrix medium format expert

Thanks for reading! If you have any questions, feel free to reach out! Your purchase strengthens our business, and we appreciate it!

steve@captureintegration.com – 404.543.8475

More From Steve:

https://www.captureintegration.com/steve-hendrix/


Discover more from Capture Integration

Subscribe to get the latest posts sent to your email.

Recent Posts